This topic created in 4188 days ago, the information mentioned may be changed or developed.
之前家里用的TPLINK的，现在已经跟不上节奏了。所以双11淘了一个网件的R6300 V2路由器，之前也有所耳闻，说网件的软件太烂，大部分都刷了DD，但是听朋友说一定要做足功课，否则会变成砖头，所以特来此问问大家有没有详细教程啊，谢谢！
 |
1
phoenixlzx Nov 14, 2014
表示公司的路由器全部是这货
然后全部刷了DDWRT 然后我给刷回去之后性能飙涨 然后批量部署了原版固件的现在下行性能又掉下来了.... |
 |
3
Robias OP |
 |
4
ahui Nov 14, 2014
科学上网,然后
http://www.desipro.de/ddwrt-ren/K3-AC/ Flashing Instruction: Before flashing I recommend to reboot the router. Nand devices with longer uptimes can hit a bad memory block while flashing. Netgear OEM Firmware -> choose the correct .chk for your router model in ftp directory Initial. (A chk contains a header that identifies the build as suitable for the specific router model, oem firmware check this header) Asus/Linksys/Buffalo -> first flash initial flash files provided by BrainSlayer DD-WRT already installed -> flash universal build dd-wrt.v24-K3_AC.bin (suported models Netgear R6300/WNDR4500 V1/V2,D1800H, Asus AC66U, Linksys EA6500V1 ) from subdirectory that contains the latest revision. (Once dd-wrt is installed you can flash universal fw .bin files for the right architecure, e.g. Broadcom AC router, afterwards) Flashing back to Netgear Firmware is supported in builds >= 22127. Just use the dd-wrt webinterface and upload netgear firmware. |
 |
5
ultragtx Nov 14, 2014
|
Select Language